Refinishing Washable Stair Treads

Mar 17th

Washable stair treads are the sections of the ladder that puts vertically and connect the rungs of the ladder. It’s act as a backup to prevent foot falling down the stairs. Toes kicking stair risers as he climbed the stairs and risers heels scraped while walking down. Stair Risers take a lot of abuse because of their location and call finishing to remove nicks, scratches and grooves. Over time, nails can work their way loose and protrude from the vertical, creating a potentially dangerous situation that requires immediate attention.

Washable Stair Treads Models
Washable Stair Treads Models

Inspect riser’s loose screws or nails. Hammer the nails in place or loose screws with a screwdriver. Place a nail set over the heads of the nails and hammering nails to put in a little below the surface of the risers. Place a layer of masking tape along the trailing edge of each washable stair treads, the part that you step up or down the stairs.

12 Photos Gallery of: Refinishing Washable Stair Treads

Image of: Washable Stair Treads Models
Image of: Washable Stair Treads Image
Image of: Washable Stair Treads Ideas
Image of: Washable Stair Treads for Narrow Stair
Image of: Rug Washable Stair Treads
Image of: Plastic Washable Stair Treads
Image of: Machine Washable Stair Treads
Image of: Interior Washable Stair Treads
Image of: High Quality Washable Stair Treads
Image of: Hand Made Washable Stair Treads
Image of: Easy Washable Stair Treads
Image of: Beautiful Washable Stair Treads
 

Press wood putty in the screw head and the holes in the nail head with a flexible spatula. Newspapers wood putty notches, grooves, small cracks and gaps. So it is just above the surface of the wood putty risers accumulate. Let dry wood putty for one or two hours.

Covering a sanding block with 220 grit sandpaper and sand risers a second time. The sand on the wood putty putty to the surface. Stairs to remove sanding dust and vacuum residues. Clean risers a tack rag to remove small pieces of dust.

Dip a brush in paint and alkyd enamel primer. Start at the top of the ladder and apply a coat of paint to the washable stair treads. Work your way down the ladder, paint each elevator moves to the landing. Let the paint dry for two to four hours, and then apply a second coat.

Related Topic:  Hickman Cord Covers
Tags: washable stair treads, refinishing stair treads